HARDOIL (the active ingredient):
New Horizont in Purification Technology

First, the active ingredient is sprayed on top of the oil in a 1:1 ratio. Once the active ingredient is applied, a foam-like substance will appear and float atop the water. This solidified material can be collected and eliminated by mechanical means for which equipment is already available. Once the unwanted solids have been removed, then the water is left almost perfectly clean. The product removes 95-99% of all toxic materials.

Both the active ingredient and the oil can be extracted from such solidified material by means of a simple physical procedure already developed and available. Equipment used for separation are known. (As may seen at Application point)

Both the active ingredient and the oil can be extracted from such solidified material by means of a simple physical procedure already developed and available. Equipment used for separation are known. (As may seen at Application point)

How HARDOIL works:

The moment HARDOIL comes into contact with any type of hydro-carbonate derivatives, HARDOIL instantly changes the carbon-link, creating a new solidified composite, which can be easily removed.

Since the solidified waste can be retrieved from the top of the spill, both, the spilt oil and the HARDOIL can be chemically separated again, and reused. Since the separation process has a 5-15% loss, out of the 100% spill affliction, the real damage amounts only to 10-20%.

The spraying equipment can be mounted on the back of a boat (assisting boat) or it can be used on firm land. The active ingredient is non-toxic and it is not harmful to marine life in either fresh or salt water. It also complies with international ISO standards. An expert opinion of the Institute for Protection of the Water Quality, in association with the Water Management Scientific Research Inc, is available.